Our company is engaged in a complete subversive technology innovation for shortcomings such as the need to be equipped with an appropriate filtration system, and uses a wet grinding ultrafine crushing wet mill instead. This is especially important when grinding materials whose dust is mixed with atmospheric oxygen to grind and grind explosive mixtures. Achieving the specified safety level usually requires carefully designed technical solutions, such as dust removal and inert gas cover systems. Especially fish pulp grinder, shrimp pulp grinder, fish and crab paste grinder (pump), fish paste grinder (crush pump), fish feed preparation grinder, paste grinder, fish feed preparation grinder, paste grind The cost of the pump to the fish meal and feed production system usually greatly reduces the cost of the actual traditional crushing and grinding machine and solves the environmental problems such as noise. Wet grinding machine colloid mill is called wet grinding machine for short, and pump type wet grinding is called grinding pump. Haoxing CN.HAOSTAR dispersing machine can be directly integrated into the material synthesis process. This allows the wet grinding process to be carried out simultaneously with other processes, so that subsequent steps can be deleted. In addition to saving time, the number of systems required and the surface dimensions of the products in contact can be greatly reduced. The pipeline wet mill is very suitable for CIP or SIP cleaning. The benefits of the wet mill make it an attractive investment product.
In order to provide tailor-made wet mill equipment solutions for laboratories and production industries according to the needs of many customers, Haoxing Machinery Equipment Technology:
High shear dispersing machine WRL, HRS wet mill, colloid mill JM wet mill, cone mill GM wet mill, wet crushing pump JP wet grinding pump and other series;
This model is made of sanitary stainless steel and is made with precision. On the basis of ensuring the effect of wet superfine crushing, the stability of the equipment is greatly ensured.
Reasonable design of high speed and shear rate WRL, HRS wet mill, colloid mill JM wet mill, cone mill GM wet mill, wet crushing pump JP wet milling pump can obtain ultrafine suspension Therefore, it is essential to make innovation and optimization on the mechanical performance structure. According to the special requirements of some industries, JMW and JPW series have been developed based on CM2000 and JM. The shear rate can be sheared and ground at high speed, and the rotor speed can reach 20~40m/s. In this speed range, the turbulence caused by shear force combined with a specially developed motor can make the particle size range as small as nanometers. The stronger the shear force, the narrower the particle size distribution of the emulsion. The improved JPW-1 series and JMW-1 series adopt a never-wearing mechanical seal device. Under normal circumstances, our mechanical seal can withstand the upper limit of 16bar pressure. The pressure of the mechanical seal is generally higher than the pressure of the sealed cavity 2-3bar, which determines that our inlet pressure resistance can reach 12-13 bar.
Haoxing CN.HAOSTAR wet mill is based on the rotor-stator principle. Haoxing CN.HAOSTAR wet mill has a large input shear energy and can achieve a particle size of 10 μm and below. Haoxing CN.HAOSTAR wet mill can handle a wide range of viscosity products. In view of its processing capacity, Haoxing CN.HAOSTAR wet mill is used in many applications, such as liquid water-soluble fertilizer, feed, fish bait, paste, fish feed, paste, fish paste, shrimp paste, fish and crab paste, fish meal paste, Wet grinding of fabric coatings, paints, dyed paper pigments, and grease.
